Here’s a short 2 minute video from Irish Flyer on YouTube, demonstrating a landing on a challenging little grass strip among the trees. There’s an ‘interesting’ S-turn needed during final approach, which could get out of hand if not treated properly!
This looks like a real ‘one way in’ landing area, with very little room for error – speed control is vital to ensure you get it right.
As usual click on the photo to view the video or click here: https://www.youtube.com/watch?v=wOvA_W6pLhM
Way back in late January 2020, Simon and Jane, who live near Cairns in north Queensland, ordered a new red Foxbat. Remember those days? We were dealing with summer temperatures, bushfires and had no inkling of what was to come.
The Aeroprakt factory made and shipped the aircraft and it arrived more-or-less on schedule at Melbourne docks in early June. With many thanks to the factory for keeping to their deadlines and the shipping companies for (almost) meeting theirs.
Australia Map
In late June all was looking good…
At that time, virus-wise, things were looking OK for Simon and Jane to pick up their aircraft from Melbourne and fly it the 1300 nautical miles (about 2500 kilometres) back home. The ‘first wave’ of COVID-19 seemed to be well under control right across Australia and we were all looking forward to a loosening of lock-down restrictions. We got on with re-assembling the aircraft at Moorabbin, south of Melbourne, getting it signed off and all the many admin things you need to do to get a new aircraft registered and test-flown.
Then fate took a heavy hand and, due to rising cases of ‘community transmission’ COVID-19 cases in Victoria (where Melbourne is located), Queensland and New South Wales (which lies between Victoria and Queensland) closed their borders in early July to stop people travelling from Victoria. It looked like Simon and Jane would have to wait at least 6 weeks before they could fly their nice new shiny red aeroplane. However, as they say, ‘where there’s a will, there’s a way’.
Willing a way
After some research, Simon and I agreed it might be possible for me to apply for a New South Wales border permit, to allow me to fly their aircraft just across the border from Victoria to a place called Albury – a thriving country New South Wales town, with a sizeable airport. Which crucially had scheduled airline flights available back to Melbourne. Simon and Jane would fly scheduled flights to Albury, via Sydney, to meet me and take over their aeroplane at Albury.
So I checked with Victorian authorities – OK to travel for work which could not be done at home…delivering an aeroplane is not a desk job! I do not live in or near a Victorian ‘virus hot spot’ and I applied online for the New South Wales border exemption permit, which was granted immediately. Availability of a return flight was checked and booked, as was a motel in Albury for an overnight stay, as Simon and Jane could not arrive until after dark, meaning an early morning handover the next day. Finally, I called Albury Airport management to check what, if anything, I needed to do after landing – with regard to the permit, health checks and so on. They were very helpful and advised me to call them after arrival and they would direct me accordingly. So we were all set to go.
Off I go
The day of the flight from Moorabbin to Albury dawned clear and sunny, with even a light southerly tail wind to guide me on my way! But, as usual with a southerly at this time of year, the Kilmore Gap through the hills to the north was clouded in and I had to delay departure by a few hours to wait for the cloud base to lift. So eventually I set off for Yarrawonga, a rest and refuel stop on the way to Albury, to pick up a Foxbat cabin cover from Diane at Punkinhead Airsports and a Mr Funnel filter from Peter McLean at P&M Aviation, both ordered by Simon.
I landed at Albury around 4.00pm in the afternoon. The airport manager took all my details over the phone and cleared me to exit the airport and go to my motel. So far so good!
Lockdown handover
The next morning, I met Simon and Jane – who stayed at the same motel (I think we may have been the only guests) – and we went to the airport in their hire car. Out of respect for them, I wore a mask in the car and later in the plane with Simon, while we did circuits – I’m pretty sure I am not infected but the last thing I wanted to do was to start a new ‘cluster’! The Foxbat was duly inspected and all the items on the handover checklist ticked off and then Simon and I went for a few circuits so he could familiarise himself with his version of the Foxbat – he’s flown several others as part of his prep for the trip.
Finally it was time for me to wish them bon voyage back to Cairns – probably a leisurely 2-3 day trip – and I proceeded to the passenger terminal to check in for my flight back to Melbourne.
Pandemic shocks
Now here’s where the pandemic really started to come home to me. I suppose, living on Melbourne’s beautiful Bayside has, to some extent, insulated me from the economic and social pandemonium going on. I have been able to continue to shop for groceries and other essentials, ride my bike for exercise along the Beach Road, continue to receive and send spare parts to Foxbat & Vixxen owners, and visit my GP if needed.
My return flight was with Rex, fully known as ‘Regional Express‘ airline. First shock – the Albury passenger terminal was completely empty. I went to the Rex check-in desk really expecting to be told the flight was cancelled. Then, second shock – it was running OK and I was the only passenger on the SAAB twin turbo-prop aircraft. It was very strange when the pilot, announcing our descent into 
Melbourne, addressed me by name! A nice touch – now I know what it feels like (well, almost) to have your own private airliner!
Arriving in Melbourne Airport was eerie. The Rex turbo-prop parked way out on the apron and I disembarked and boarded – still alone – a shuttle bus back to the terminal, passing row upon row of mothballed JetStar Airbus airliners, engines cocooned and landing gear covered in plastic protection. Very weird.
My partner Louise met me in the car park and we started our journey home in the car. I was stunned as we exited the multi-storey park to see a vista of completely empty long-term car parks, as far as the eye could see. The mothballed aircraft were shocking enough but somehow the hectares and hectares of empty long-term car parks really hit home. And this is just Melbourne airport – this picture is repeated many times over around the world.
This pandemic is something completely outside our experience, knowledge and understanding. The economic cost is astonishing. And for those whose loved ones have died or suffered long-term consequences from the disease, we can hardly imagine their devastation. Let’s hope for an effective vaccine and/or treatment soon, so we can begin to recover our health and sanity.
For 2020 we are introducing some updates to the A22LS Foxbat/Kelpie and A32 Vixxen aircraft available in Australia while keeping prices at the same levels as for 2019.
First among these is a new windscreen design, using moulded 3mm acrylic instead of the flex-to-shape 2mm flat polycarbonate sheet. The acrylic windscreen is more rigid than the original design, which has served us well for over 20 years. The main benefit is noise reduction in the cabin, particularly noticeable in the A32 Vixxen, which is already a relatively quiet aircraft. There are a couple of minor downsides – the acrylic screen needs special jigs both for original installation and when a replacement screen is fitted; it’s also more expensive than the original, flat sheet design. All new A22LS Foxbats/Kelpies and A32 Vixxens built for Australia after 01 January 2020 will be fitted as standard with the new type of screen.
Although replacement polycarbonate screens will continue to be available, a retro-fit acrylic screen kit will also be available for owners wishing (optionally) to replace their existing polycarbonate screen, should it become damaged. For a returnable deposit, Foxbat Australia will be able to loan your qualified engineer a set of jigs to enable the replacement. We are also making a short video to cover installation of the new screen.
Next, the A22LS Foxbat will now have as standard the so-called ‘Kelpie’ metal luggage bay with side door. We have sold 20 of the Kelpie variant since we introduced it around 2 years ago and in addition, most Foxbat buyers have opted for the Kelpie bay over the previously ‘standard’ canvas luggage container. The main reason for this is probably that the metal luggage bay is rated at 30 kgs maximum as opposed to the canvas container at 20 kgs. The contents of the container remain accessible in flight and a hard cover is included if in-flight access is not required. There is a small basic weight penalty but as the A22LS is already one of the lightest (and strongest) LSAs on the Australian market, you will still be able to carry over 200 kgs of people and bags, even after filling full with fuel.
We have offered a variety of VHF radios over the years, including the popular German Filser/Funkwerk OLED radio. However, after extensive experience with TRIG – a UK (well, Scotland actually) manufacturer – we have decided to include the TRIG TY91 VHF radio as standard on all A22LS and A32 aircraft in Australia. Where optionally requested, the TRIG TT21 mode S transponder will visually match the TY91 radio. Dynon SkyView equipped aircraft will continue with the Dynon VHF radio.
For 2020, all A22LS Foxbats with the Y-stick control configuration will now standardise on the ‘long leg’ raised instrument panel. This panel has curved cut-outs along the bottom edges on pilot and co-pilot side, facilitating comfort for those owners with longer than average legs.
The ‘long-leg’ option isn’t available with twin-yoke configuration controls as the yokes support structure occupies some of the space taken by the cut-outs in the panel bottom. Also, for the A22LS Kelpie, the UHF radio is normally fitted under the panel on the co-pilot side. If you require the long-leg cut out on a Kelpie, there will be a small additional charge to cover installation of a remote head for the UHF radio. The A32 already has legroom equivalent to the A22LS ‘long-leg’ panel.
We are working with the factory to offer a number of additional options on A22LS and A32 aircraft. Among these are a visor-style tinted sun screen in the top of the windscreen, larger capacity fuel tanks for the A32 and a glider tow-hook for the A32. We are also hoping for a supplement to allow doors off flying in the A32 to match that of the A22LS.
As an aside, although we are sometimes asked by customers if they can fit bigger tyres to the A32, it is unlikely these will be formally approved by the factory any time soon. From experience with flying school owners who have removed the wheel spats and leg fairings, we are aware that this can reduce the cruise speed by as much as 9-10 knots, effectively pulling the straight and level cruise of the A32 down towards to that of the A22LS. The A32 is fitted standard with aviation grade AirTrac 15×6.00×6 tyres and landowner experience has shown that these are more than sufficient for use on paddock and gravel strips with the spats remaining in place.
SPECIAL OFFER – for a limited number of aircraft we will include a Garmin Aera 660 GPS with a panel mount of your choice at no extra cost. First come, first served!
For more information on any of these items, please see our website at www.foxbat.com.au or call Ido Segev on 0431 454 676 or Peter Harlow on 0413 900 892.
Just recently, there seems to have been a spate of low flying accidents in LSAs and ultralights, some of which have involved even experienced low level pilots. And a couple of incidents where the pilot had no low level approval or endorsement. And I’m not talking about landing or take-off accidents.
A lot of LSAs and ultralights – including Foxbats and Vixxens – are bought by landowners for use on their properties – which sometimes includes low flying. By which I mean at heights often well below the 500 foot (normally) legal minimum height. Landowners can fly at any height over their own land.
However, there is a safety reason for the 500 foot height limit – even a small error made at heights under 500 feet can rapidly develop into a major disaster unless you have the right training to avoid and/or quickly correct. The risks rise exponentially if you’re flying at heights as low as 100 or 200 feet, and losing concentration even for a second or two can be catastrophic. Add in slow flight, obstacles, wires and wind and you really need to know what you are doing at low level.
So, first off – if you’re going to do low flying at all, GET A LOW FLYING ENDORSEMENT! There’s a lot more to flying close to the ground than at first you may think. See CASR 1998, Subpart 61.Q – Low‑level ratings, for the main requirements.
Both CASA and RA Australia have published clear requirements for low level flying endorsements both of which have minimum flying hours on type and passing a flight test – normally after a minimum of 5 hours’ instruction at low level on type. To stay legal, there are also currency requirements – eg completion of at least 2 hours of low level flight during the previous 6 months – and flight review requirements, eg CASA requires an instructor flight review for the low level endorsement every 12 months to ensure you retain the skills needed. RA Australia also requires the pilot to give good reason why they should have a low-level endorsement in the first place.
Second, if you have a low level endorsement and you plan to fly low on a regular basis, it is highly recommended that you WEAR A HELMET! In another life, I used to ride a motorcycle for a couple of hours every day. We had a saying then – ‘if you’ve got a $10 head, put it in a $10 helmet…or even better, save your money!’ Now I don’t know about you but I reckon my head is worth a lot more than $10 (some might argue otherwise), so make sure it’s a good quality helmet with a good quality headset.
Unlike motor vehicles, most aircraft – certainly LSAs and ultralights – are not fitted with airbags. However well designed to absorb impact, an airframe can only do so much to protect you. As your head can so easily be injured, protect it with a helmet!
Third, MAKE SURE YOUR PLANE IS IN TOP CONDITION! The last thing you want when you are flying close to the ground is an engine failure or some part of the airframe or control system to malfunction. It is highly likely that there will just not be enough time to recover before the ground rises up and hits you. Regular maintenance – even more frequently than required – and a sharp eye for any abnormalities in the aircraft are one of the keys to keeping yourself safe.
Finally, MAKE SURE YOU ARE IN TOP CONDITION yourself. We have all heard about ‘Human Factors’, we even had to pass an exam on them to get our license. So, to remind you, if you’ve been on the booze the night before, you’re taking medication that could affect your concentration or you’re feeling unwell in any way at all – don’t fly! Something else to remember – when you are low flying, you need a lot more concentration than plain ordinary flying. You’ll need to take regular and frequent rest breaks.
When you are a pilot, low flying can be very exhilarating. But it’s also very dangerous. However easy it looks, make sure you have the right training, your aeroplane is in perfect flying condition and you are 100% fit and ready. And, for what it’s worth – wear a helmet!
Happy (low) flying!
Monday 16 December 2019 dawned clear and cool – with a forecast of a hot and sunny, 35+ degrees celsius (that’s 95+ degrees Fahrenheit in old money), later in the day. Just after 07.00, my colleague Ido Segev and I collected two Ferrari-red Alto aircraft from Moorabbin Airport and flew them to our home base at Tyabb Airport (home of the Peninsula Aero Club), about 15-20 minutes flying time to the south. The air was ‘smooth as’ as they say and the brand new Alto I was flying purred along at an indicated 110 knots. Just behind me in our Alto demonstrator, Ido was enjoying the silky smooth air too.
At Tyabb, we met up with Matt McPhee, who would pilot one of the Altos in formation with Ido, and Mike Rudd, our videographer/photographer extraordinaire, who would be flying with me in our company Foxbat.
After about 45 minutes of planning, Mike and I took off, followed by Matt and Ido – Matt would be ‘number one’ closest to the camera and Ido ‘number two’, further out. Above about 1,000 feet, the air was still smooth so we climbed to about 1,500 feet for the shoot to begin.
We started off flying big circles, with maximum bank of about 15 degrees, to capture the sun and shadows from all angles. First, a right turn with Devilbend Reservoir and the ground as background and then left with the sky as background. Finally, we ran south along the beach area near Mornington, on the peninsula. There were a few bumps developing on the south lee side of the hill at Mount Martha, so we climbed to 2,000 feet, tracked in a big loop back to the north and tried the beach again. We also got some good pictures over Martha Cove Marina.
All too soon – although it was in fact well over an hour – we were done and the two Altos broke away to have some fun on their own while Mike and I returned to base at Tyabb.
As if I needed it, this flight reminded me yet again of the superb platform the Foxbat makes for photography, particularly air-to-air photography of LSA and ultralight type aircraft. The huge glazed doors allow such good visibility and the strut is far enough forward that positioning the target aircraft is very easy. Although the Foxbat is approved for doors off flying, on this occasion we opted to leave the doors on, to minimise wind buffeting. Unfortunately, our company Foxbat does not have the optional photo doors.
Nevertheless, the results are amazingly good. The lexan doors are relatively distortion free and both the video and photos are as clear as you could possibly need – Mike was shooting on 4k for the video and equivalent resolution for the stills.
You can see a short 3-minute video of the mission by clicking here: Alto Formation Shoot
There is a selection of Alto photos, including the formation, here: Alto Gallery
I’ve just experienced at first hand appallingly wrong media reports of an aeroplane accident at our local airport in Moorabbin, near Melbourne. If the media can get so wrong a basic report like this, how can they ever be believed when it comes to more complex issues?
However, irrespective of the wrong reporting, our thoughts are with the pilot, who was taken to hospital with serious injuries.
The story goes like this: accompanied by stills and video of the accident site, reports – so similar they must have just been blindly copied from one source – said a light aircraft had ‘come down’ at Moorabbin Airport. Two people were on board and the aircraft was a ‘high wing A22 Foxbat, made in Ukraine’ owned by a local flying school. 24 emergency personnel were on site, currently working to free the pilot, who remained in the aircraft.
Even a cursory glance at the picture of the inverted aeroplane (see above) shows it to be a low wing, not a high wing. It also turns out that there was only one person – the pilot – on board and the accident almost certainly resulted from a runway departure, either on take-off or landing. Quite an exaggeration to say the aircraft had ‘come down’.
I tried to find phone numbers for the various news media which published the report – ABC, Channel 9 News, 3AW, Herald Sun and The Age newspaper – to advise them of the errors. Have you ever tried to find a phone number for these people to correct their mistakes? Forget it, they just don’t publish such numbers. Presumably, the last thing they want is people calling to point out errors in their stories, as their lines would be permanently clogged!
In the end, I sent ‘urgent’ emails to the various newsrooms to say the aircraft was not a Foxbat. Only The Age newspaper responded with an apology by email and immediate correction on their online news page. Without any kind of acknowledgement, over the next half an hour most of the others removed the reference to the Foxbat, substituting with words like ‘a small 2-seat light aircraft’. I still don’t know if the Herald Sun changed their feed as they insist you pay a subscription to see their news!
This kind of erroneous reporting brings to mind another event at Moorabbin, where one of our Vixxens made a heavy bounced landing in very windy conditions and bent the nose landing gear. Right or wrong, the pilot elected to go round after the impact, only to be warned by the tower of the bent gear. At that time, almost all the media reported that the aircraft was ‘circling while the pilot attempted to fix the landing gear’ – a clearly ridiculous statement if you thought about it for only half a second! In fact, following emergency personnel advice, he was waiting for a foam blanket to be laid on the runway before making a successful landing, during which the nose leg fully collapsed and the aircraft remained upright. Both pilot and passenger walked away without a scratch.
In my personal experience, I have learned these lessons about news stories:
1. They have almost certainly not been given even a basic facts check.
2. The media makes it as difficult as possible for you to correct their mistakes.
3. If they get even simple, easy to check, stories wrong, how on earth can their reporting on more complex issues be believed?
4. It is very easy for people to state complete lies and the news media will publish it.
You have been warned!
After almost 5 years with our current website at www.foxbat.com.au we have developed a new, much more modern site design for Foxbat Australia which will be going live in the next week or so.
Although the old website has been widely used and favourably commented on, apart from making it more visually attractive, we have aimed to make navigation simpler – particularly for the many visitors seeking technical specifications and maintenance information.
All the details from the old site have been retained and updated, including the ever-popular ‘Used Aircraft‘ page, which is statistically the most visited single page on the site! In addition, if you want to find a school or club in Australia using Aeroprakt aircraft, we have introduced a clickable map to help you find one near to you.
There are also additions of an in-site photo and video gallery, so you don’t have to navigate away from the site to see visuals. However, our linked Foxbat YouTube channel and Foxbat Facebook Page will remain in operation – have a look, we post new items regularly on Facebook and are planning more YouTube videos over the coming months.
Once the new site is up and running, feel free to send me your comments!
All things Aviation for Foxbat Flyers
All things Aviation for Foxbat Flyers
Road To Aviation
An Airline Industry Blog
Foxbat Pilot 